Filling and Adjusting Grinders
1. Filling the Grinder:
Unscrew the top knob and then lift off the top wooden section. Load peppercorns or salt crystals into the bottom section through the opening where the metal shaft sticks out. Replace the top wooden section and tighten the silver knob until it just touches the top.
2. Adjusting the Grind:
There are two ways to adjust the grind. After filling the grinder with salt or pepper, tighten the knob until it just touches the top and stop. The grinder is now in the finest setting. By turning the top back and forth and pulling up at the same time you will get a coarser grind. The second way to adjust is by tightening the silver top knob. The tighter the coarser, the looser the finer. Crank style grinders can only be adjusted with the knob.
Filling and Adjusting Your Combo Unit:
Filling the Combo Unit:
Unscrew the top knob and then lift off the top wooden section. The peppercorns are loaded into the bottom section through the opening where the metal shaft sticks out. Replace the top wooden section and fill with pre- ground salt. Replace the metal shaker lid and tighten the silver knob until it just touches the shaker lid.
Adjusting the Grind:
There are two ways to adjust the grind. After filling the grinder with salt and pepper, tighten the knob until it just touches the top and stop. The grinder is now in the finest setting. By turning the top back and forth and pulling up at the same time you will get a coarser grind. The second way to adjust is by tightening the silver top knob. The tighter the coarser, the looser the finer.